Voltage indicator WEGA 2.2C for RMU
Available on backorder
Mã sản phẩm: 51-2250-001
The WEGA 2.2C voltage indicator is based on the principle of cascading capacitors from high voltage to 110Vac for the purpose of display phase status, testing ComPass B. The display on the front panel of WEGA 2.2C allows all parameter settings check for compliance with standards.
Product Features
■ Standard IEC 61243-5 (VDE 0682-415)
■ Voltage range (10 – 52 kV)
■ No maintenance required
■ Voltage indicator: Phase selector
■ Connection with ComPass B/BP/BS and SIGMA D/D+
■ Front interface: Standard IEC 61243-5
■ Built-in LED for voltage indicator
■ Built-in output relay
Related products
-
EES Equipment, Fault indicators
Annunciator USM/BSM
The EES annunciator is designed for indicator fault signals on the electrical panel This product is use on Control & Protection panels, control systems such as SCADA, DSC.
Built-in IEC 60870-5-101/104 and IEC 61850protocols, the EES annunciator will be directly connected to SCADA or DCS without through the RTU cabinet.Product Features
■ Number of channels from 8 to 48
■ Two power supply
■ Programmable output relay to report RTU
■ Wide range of power supply 24~220Vac/dcAdvantages of product
■ 1 x LAN Ethernet/RJ45
■ 1 x COM – RS232
■ 2 x USB-A
■ 1 x CAN-Bus/RJ45SKU: n/a -
Fault indicators, Horstmann Equipment
Underground cable indicator Compass A
ComPass A is a short circuit and earth fault indicator for medium voltage distribution grids for earthed and Isolated earthed neutral system. Through the Modbus protocol, the device can be send reporting error events and measured data to the SCADA system. The product is compatible with RMU cabinets of brands such as: SafeRing of ABB; RM6 of Schneider; 8DJH, NXPLUS C of Siemens; XIRIA of EATON
Product Features
■ Short circuit and earth fault detection with 3 single-phase current transformers
■ Display the current in each phase
■ Multi-language OLED display, multi-color LED
■ Remote alarm via RS485/Modbus or 4 configurable relay contacts
■ Simple and intuitive operationSKU: 38-0102-001 -
Fault indicators, Horstmann Equipment
Underground cable indicator Sigma F+E 2.0
The underground cable indicator Sigma F+E 2.0 is designed to detect and display local and remote short-circuit and earth fault in the medium voltage grid The product is compatible with RMU cabinets of brands such as: SafeRing of ABB; RM6 of Schneider; 8DJH, NXPLUS C of Siemens; XIRIA of EATON
Product Features
■ Short circuit and earth fault detection with 3 single-phase current transformers.
■ Indicator per phase (LED)
■ Adjustable Trip current
■ External power supply 24Vdc
■ Remote alarmAdvantages of product
■ No false trips due to higher harmonics
■ Detection of high-impedance earth faults
■ Add fault direction function
■ Automatic and remote ResetSKU: 37-2111-101 -
Fault indicators, Horstmann Equipment
Overhead line fault indicator NAVIGATOR-LM
Overhead line fault indicator NAVIGATOR-LM Version C Designed to detect short circuits for overhead lines up to 160kV, indicate fault with high intensity LEDs and send signals to RTU cabinets on nearby power poles for transmission to Scada.
Product Features
■ Short circuit detector
■ LED fault indicator with 360 degrees
■ Double flashing when fault is detected for the 2nd time
■ Yellow LED indicated when the battery life is under 50h
■ Automatic and manual reset
■ Easy to attach to the lineSKU: 41-2101-311 -
Fault indicators, Horstmann Equipment
Underground cable indicator Alpha E
The underground cable indicator Alpha E is designed to detect and display local and remote short-circuit in the medium voltage grid The product is compatible with RMU cabinets of brands such as: SafeRing of ABB; RM6 of Schneider; 8DJ, 8DH, SIMOSEC of Siemens; SVS, XIRIA of EATON
Product Features
■ Adjustable Trip current
■ Flag indicator (black/red)
■ Remote alarm
■ No need external power supplyAdvantages of product
■ Maintenance-free, battery-free (Alpha M)
■ Remote reset (Alpha E)SKU: 30-1715-001
There are no reviews yet.