SFERE720 Power Quality Analyzer
Mã sản phẩm: SFERE720
SFERE720 is a Power Quality Analyzer that can monitor and record power quality parameters. SFERE720 provides an accurate measurement monitored voltage and current characteristics according Class A with harmonic distortion up to 63rd.
 |
 Datasheet / Manual / Test |
| Application
■ Multifunction measurement |
Advantages of product
■ Class 0,2s for kWh |
SPECIFICATION OF ELECNOVA PRODUCTS
Based on 0 reviews
Be the first to review “SFERE720 Power Quality Analyzer”
You may also like…
-
Elecnova Equipment, Measuring Equipment
Multi-function Meter PD194Z-9HY
PD194Z-9HY is a multi-function meter for measures all grid parameters with harmonic upto 31st, built-in RS485 or Profibus DP communication port, available 4DI/3DO/1AO for different applications.
Datasheet / Manual / TestApplication ■ Multifunction measurement
■ Installation for electrical switchboard
■ RS485, Profibus DP
■ Display 4 lines
■ Index protection IP5xAdvantages of product ■ Class 0,5s for kWh
■ Dimension 96×96
■ Secondary current transformer: 1/5A
■ 4DI, 3DO, 1AO
■ Harmonics upto 31stSKU: PD194Z-9HY -
Frer Device, Measuring Equipment
Multifunction meter Q96P3H
Q96P3H Multifunction analyser for use in three-phase systems with unbalanced load and distorted waveforms In addition to the main parameters of an electrical network (kWh & kVArh bi-directional energy counting), it has an additional set of “advanced” measurements that allow more efficient monitoring or provide additional information on the operating status of the system.
Datasheet
User Manual
Modbus RTU
TCP/IP
Profibus DP
Test ReportApplication ■ Multi-function measurement (kWh & kVArh bi-directional)
■ Installation for electrical switchboard
■ Communication RS485, TCP/IP, Profibus DP, IEC61850
■ Protection IP50 front, IP20 rearAdvantages of product ■ Class 1 or 0,5s for kWh
■ Dimension 96×96×102
■ Secondary current transformer: 1/5A
■ 2 Relays output 250V, 100mASKU: Q96P3H005 -
Algodue Equipment, Measuring Equipment
Multifunction UPM309
UPM309 is an innovative product for measuring and recording Electrical system parameters. Meter has built-in RS485 port for Modbus RTU/ASCII protocol or Ethernet port for Modbus TCP/IP protocol. It is available with WintoolNET software, webserver for remote management tool completely free.
Datasheet
User ManualApplication ■ Monitoring and control energy
■ Multifunction measurement
■ Peak value power control
■ Installation for electrical switchboard
■ Remote measuring via communicationAdvantages of product ■ Class 0,5 for kWh standard IEC/EN 61557-12
■ Dimension 96×96×39 mm
■ Current transformer 1/5A
■ Memmory 8Mb to record (ENH version)
■ Record all energy parameters (ENH version)
■ 2 Digital input, 1 Digital output, 1 Analog output (option)SKU: 1211.000x.0001
Related products
-
Algodue Equipment, Measuring Equipment
Power Quality Analyzers PQM4000
PQM4000 is a Power Quality Meters are able to monitor and record the major power quality parameters They provide an accurate measurement, voltage characteristics are monitored according to Class A specification.
Datasheet
User ManualApplication ■ Electrical monitoring and control system
■ Install on Switchboard or Rack
■ Analysis and management energy
■ Supervision for harmonic
■ Remote measuring and cost analysisAdvantages of product ■ Standards IEC/EN 61000-4-30: 2015 Ed.3, Class A
■ Record data for analysis EN 50160
■ Communication protocol Ethernet, RS485 and WIFI
■ USB transfer data to computer
■ Built-in GPS for time syncSKU: 1301.0002.0001 -
Algodue Equipment, Measuring Equipment
Three-phase direct energy meter 80A – UEM80
UEM80 is DIN Rail mounted three-phase energy meter use to measure kWh, kVArh in civil and industry, communication Modbus RTU, M-Bus or TCP/IP
Datasheet
User ManualApplication ■ Main measurement kWh, kVArh
■ Install on DIN Rail
■ Dimension: 90Hx72Wx64D
■ Certification MID (see more)
■ Protection IP51Advantages of product ■ Class B for kWh with EN 50470-3
■ Class 1 for kWh with IEC 62053-21
■ Class 2 for kVArh with IEC/EN 62053-23
■ Direct upto 80A without current transformer
■ Start current: 20mASKU: 1104.00xx.0001 -
Algodue Equipment, Measuring Equipment
Multifunction UPM309RGW
UPM309RGW is a meter use Rogowski coil, suitable for install at location can not turn-off Power to replace or install current transformers. Meter has built-in RS485 port for Modbus RTU/ASCII protocol or Ethernet port for Modbus TCP/IP protocol. It is available with WintoolNET software, webserver for remote management tool completely free.
Datasheet
User ManualApplication ■ Monitoring and control energy
■ Multifunction measurement
■ Peak value power control
■ Installation for electrical switchboard
■ Remote measuring via communicationAdvantages of product ■ Class 0,5 for kWh standard IEC/EN 61557-12
■ Dimension 96×96×39 mm
■ Use Rogowski coils
■ Memmory 8Mb to record (ENH version)
■ Record all energy parameters (ENH version)
■ 2 Digital input, 1 Digital output, 1 Analog output (option)SKU: 1212.00xx.0001 -
Algodue Equipment, Measuring Equipment
Multifunction meter UPM209
UPM209 is 2 way Energy meter for record the parameters of the Power system at the grid connection point and sends it to SmartLogger, suitable for load suppervision (Zero Export) when install withSolar Inverter Huawei. Meter has built-in RS485 port for Modbus RTU/ASCII protocol or Ethernet port for Modbus TCP/IP protocol.
Datasheet
User ManualApplication ■ Monitoring and control energy
■ Multifunction measurement
■ Peak value power control
■ Installation for electrical switchboard
■ Remote measuring via communicationAdvantages of product ■ Class 1 for kWh with standard IEC/EN 62053-21
■ Current transformer 1/5A
■ Memmory 8Mb to record (ENH version)
■ Record all energy parameters (ENH version)
■ 1 Digital outputSKU: 1208.00xx.0001 -
Algodue Equipment, Measuring Equipment
Multifunction UPA20 (UL Certified)
UPA20 is a multifunction meter with display 3 lines parameters and is can be detecting wrong wiring. Built-in port RS485 for Modbus protocol.
Datasheet
User ManualApplication ■ Multifunction measurement
■ Installation for electrical switchboard
■ Remote measuring via communication
■ Protection IP52Advantages of product ■ Class 0,5s for kWh with IEC 62053-22
■ Dimension 96×96
■ Secondary current transformer: 5A
■ Certificate UL No: E231725
■ 3 Digital input, 1 Digital output (option)SKU: 1213.0001.0001
There are no reviews yet.