Overhead line fault indicator NAVIGATOR-LM
Available on backorder
Mã sản phẩm: 41-2101-311
Overhead line fault indicator NAVIGATOR-LM Version C Designed to detect short circuits for overhead lines up to 160kV, indicate fault with high intensity LEDs and send signals to RTU cabinets on nearby power poles for transmission to Scada.
Product Features
■ Short circuit detector
■ LED fault indicator with 360 degrees
■ Double flashing when fault is detected for the 2nd time
■ Yellow LED indicated when the battery life is under 50h
■ Automatic and manual reset
■ Easy to attach to the line
Based on 0 reviews
Be the first to review “Overhead line fault indicator NAVIGATOR-LM”
Related products
-
EES Equipment, Fault indicators
Annunciator USM/BSM
The EES annunciator is designed for indicator fault signals on the electrical panel This product is use on Control & Protection panels, control systems such as SCADA, DSC.
Built-in IEC 60870-5-101/104 and IEC 61850protocols, the EES annunciator will be directly connected to SCADA or DCS without through the RTU cabinet.Product Features
■ Number of channels from 8 to 48
■ Two power supply
■ Programmable output relay to report RTU
■ Wide range of power supply 24~220Vac/dcAdvantages of product
■ 1 x LAN Ethernet/RJ45
■ 1 x COM – RS232
■ 2 x USB-A
■ 1 x CAN-Bus/RJ45SKU: n/a -
Fault indicators, Horstmann Equipment
Underground cable indicator Compass B
CComPass B is a Directional short-circuit and earth fault indicator for medium voltage distribution with a earthed & Isolated earthed neutral system Through the Modbus protocol, the device can be send reporting error events and measured data to the SCADA system. The product is compatible with RMU cabinets of brands such as: SafeRing of ABB; RM6 of Schneider; 8DJH, NXPLUS C of Siemens; XIRIA of EATON
Product Features
■ Detect directional short-circuit and earth fault by 3 single phase current transformer
■ Monitor V, I, F
■ Monitor: P, Q, S, Cosφ
■ Monitor voltage V<, V>
■ Multi-language OLED display, multi-color LED
■ Remote alarm via RS485/Modbus or 4 configurable relay contacts
■ Simple and intuitive operationSKU: 38-4102-001 -
Fault indicators, Horstmann Equipment
Underground cable indicator Compass A
ComPass A is a short circuit and earth fault indicator for medium voltage distribution grids for earthed and Isolated earthed neutral system. Through the Modbus protocol, the device can be send reporting error events and measured data to the SCADA system. The product is compatible with RMU cabinets of brands such as: SafeRing of ABB; RM6 of Schneider; 8DJH, NXPLUS C of Siemens; XIRIA of EATON
Product Features
■ Short circuit and earth fault detection with 3 single-phase current transformers
■ Display the current in each phase
■ Multi-language OLED display, multi-color LED
■ Remote alarm via RS485/Modbus or 4 configurable relay contacts
■ Simple and intuitive operationSKU: 38-0102-001 -
Fault indicators, Horstmann Equipment
Voltage indicator WEGA 2.2C for RMU
The WEGA 2.2C voltage indicator is based on the principle of cascading capacitors from high voltage to 110Vac for the purpose of display phase status, testing ComPass B. The display on the front panel of WEGA 2.2C allows all parameter settings check for compliance with standards.
Product Features
■ Standard IEC 61243-5 (VDE 0682-415)
■ Voltage range (10 – 52 kV)
■ No maintenance required
■ Voltage indicator: Phase selector
■ Connection with ComPass B/BP/BS and SIGMA D/D+
■ Front interface: Standard IEC 61243-5
■ Built-in LED for voltage indicator
■ Built-in output relaySKU: 51-2250-001 -
Fault indicators, Horstmann Equipment
Voltage indicator WEGA 1.2C for RMU
The WEGA 1.2C voltage indicator is based on the principle of cascading capacitors from high voltage to 110Vac for the purpose of display phase status, testing for ComPass B. The display on the front panel of the WEGA 1.2C allows all parameter settings compliance with standards.
Product Features
■ Standard IEC 61243-5 (VDE 0682-415)
■ Voltage range (10 – 52 kV)
■ No maintenance required
■ Voltage indicator: Phase selector
■ Connection with ComPass B/BP/BS and SIGMA D/D+
■ Front interface: Standard IEC 61243-5SKU: 51-1250-001
There are no reviews yet.